About Us
Every job we take is within a short drive of Houston. Staying local is deliberate: it is how we hold arrival windows and how we get back quickly when something needs a second look.
You call or book online, and we give you an arrival window, not a vague promise to show up sometime that day. Before the crew touches anything, they walk the house with you, pull a register, look at the plenum and the coil, and tell you what they see. Then you hear what the job costs and why. If the system is simple and accessible, the number stays low. If you have a two-system house, long attic runs, flex that has to be unburied, or a return that drops through the slab, the labor goes up and we say so before we start. Nothing gets added mid-job without you agreeing to it first.
Gulf Coast humidity plus a near-year-round cooling season is the core duct problem here: systems run long hours, and attic-mounted ductwork sits in 130-140°F summer attics carrying 55°F air, so any gap in insulation or vapor barrier condenses. That is why most of our Houston calls sound the same. Musty supply odors. Visible growth at the plenum. A room that never cools. Wet fiberglass liner and sagging flex are routine, and so is microbial growth on plenum and coil surfaces. Spring brings oak, pine, and pollen loads, plus mold spores that stay elevated most of the year because the region never truly freezes out. Clay soil shifting cracks slab-penetrating returns and shakes boot connections loose, and flood events leave sediment and silt in low returns and in any under-slab duct in older stock. High summer humidity means AC oversizing short-cycles the system, never dehumidifies, and leaves damp interior surfaces and musty supply odors. We work on Carrier, Trane, Lennox, Goodman, Rheem, and American Standard equipment.
On site, the crew runs a truck-mounted vacuum, seals every register so the system pulls negative, then works each run with rotary brushes and whips back toward the collection point. We clean the plenum and the return drop by hand. We open the air handler and show you the blower wheel and the coil before and after. If the coil is loaded, that is a separate job and we explain it rather than brushing past it (see coil cleaning). If the real issue is leaking joints in a hot attic, cleaning will not fix it, and duct sealing is the better money. Sometimes the honest answer is that your ducts are fine and you need a filter change on a schedule you will actually keep. We tell people that regularly, and we still show up the next time they call.
Our service area
We cover Houston and the surrounding towns. If you're in one of these areas and have a air duct cleaning problem, call us. We usually get out the same day.
When do we tell a Houston homeowner not to clean the ducts?
More often than people expect. If the flex is sagging between joists and the liner is soaked, cleaning it accomplishes nothing. Wet fiberglass does not dry in a 130–140°F attic carrying 55°F air. It stays wet because the vapor barrier failed. We say replace that run and we say why, on the spot, with photos from the attic.
The judgment call usually comes down to the liner. Smooth interior, dry, intact outer jacket. That duct cleans well and stays clean. Torn inner core or visible microbial growth on the fiberglass itself. That one is done. Metal plenums and boots are different. Those we clean and reseal, even when they look rough, because the shaking from clay soil movement loosens connections more than it ruins the metal.
Under-slab returns in older Houston stock get their own conversation. Silt from flood events settles low and does not vacuum out cleanly. Sometimes the honest answer is abandoning that return and rerouting overhead.
We also check whether the system is oversized before blaming the ducts. A short-cycling unit never dehumidifies. You get musty supply odors regardless of how clean the ductwork is. Cleaning it will not fix that, and we will tell you so.
Call us at (713) 234-4199. We'll tell you the price before we start. You can also reach us through the contact page if you'd rather send a message.
Call (713) 234-4199